Catalytic Oven Surfaces - NEFF U 1644 Series Operating And Fitting Instructions Manual

Catalytic oven
surfaces
Cleaning the catalytic
surfaces of the oven
Cleaning the oven floor,
the oven ceiling and the
side walls
42
The rear wall, top and side walls of the oven is
coated with self-cleaning enamel. The surface cleans
itself while the oven is in operation. Large splashes
sometimes only disappear after the oven has been
used several times.
Never use oven cleaner on the catalytic surfaces of
the oven.
Should the enamel become slightly stained, this will
not affect its self-cleaning properties.
Use hot soapy water or a vinegar solution.
It is best to use oven cleaner if the oven is very dirty.
Only use oven cleaner in a cold oven.
Note:
Enamel is baked on at very high temperatures.
This can cause some slight colour variation. This is
normal and does not affect the function. Do not use
coarse scouring pads or strong cleaning agents to
remove such discolorations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti-corrosion protection is guaranteed.