Indicator (Block Model 034); Face Plates - Omron CXONE-ALC-V4 - 10-2010 Operation Manual

Indicator (Block Model 034)

6-6

Indicator (Block Model 034)

6-6-1

Face Plates

4: Alarm Settings
The Indication and Setting does not provide a deviation alarm setting.
The following screen is a Tuning Screen for the Indication and Setting face
plate built using the Face Plate Auto-Builder for NS in a 640×480 screen reso-
lution.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
This section describes only the differences between the Indicator and Basic
PID (Block Model 011). For details on the areas not covered here, refer to 6-1
Basic PID (Block Model 011).
The face plates are almost the same as for Basic PID (Block Model 011),
except that the Indicator does not provide functions related to SP and MV, and
it is used as a PV Indicator Operator Interface.
Section 6-6
59