Tuning Screens - Omron CXONE-ALC-V4 - 10-2010 Operation Manual

Indication and Setting (Block Model 031)
6-8-2

Tuning Screens

72
3: MV Display, MV Change Button, and MV Index Position
The Indication and Setting face plate does not provide an MV display, MV
Change Button, or MV index position.
The following diagram shows an Indication and Setting face plate built using
the Face Plate Auto-Builder for NS in a 640×480 screen resolution.
The whole face is built using 458×142 dots.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
The Tuning Screen for the Indication and Setting Block is almost the same as
the one for the Basic PID Block (Block Model 011), except this screen does
not have the MV-related functions and the SP can be switched between
LOCAL and CAS.
1: AT
The Indication and Setting Block does not provide an AT Button.
2: DV
The Indication and Setting Block does not provide a deviation alarm setting.
Section 6-8