Upgrades Made For Version 3.0; Upgrades Made For Version 3.1 - Omron CXONE-ALC-V4 - 10-2010 Operation Manual

Upgrades Made for Version 3.0

1-5 Upgrades Made for Version 3.0
Additional Support for
Function Blocks
Automatic Comments for
Unit and Scaling Settings
1-6

Upgrades Made for Version 3.1

Additional Support for
Function Block
Output in NS System
Version 6.6 and NS-
Runtime Version 1.0
Formats
The functional changes made between version 2.0 and version 3.0 of the
Face Plate Auto-Builder for NS are described in this section.
Face plates can be built for the following function blocks in addition to the
function blocks supported for version 2.0.
• Indication and Setting (Block Model 031)
• Ratio Setting (Block Model 033)
• High/Low Alarm (Block Model 111)
• Timer (Block Model 205)
• Counter (Block Model 208)
• ON/OFF Valve Manipulator (Block Model 221)
• Motor Manipulator (Block Model 222)
• Reversible Motor Manipulator (Block Model 223)
• Motor Opening Manipulator (Block Model 224)
• Blended PID (Block Model 013)
• Batch Flowrate Capture (Block Model 014)
Comments are automatically entered for automatically allocated unit and scal-
ing settings when a project is generated. This prevents mistakes in editing
automatically allocated unit and scaling settings when editing projects.
The functional changes made between version 3.0 and version 3.1 of the
Face Plate Auto-Builder for NS are described in this section.
Face plates can be built for the following function block in addition to the func-
tion blocks supported for version 3.0.
• Segment Program 3 (Block Model 158)
Projects can be output in NS System version 6.6 and NS-Runtime version 1.0.
Section 1-5
5