Specifications - Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual

Specifications

Specifications
RF characteristics
Frequency ranges
Transmission frequencies
Switching bandwidth
Frequency stability
Antenna output
RF output power at 50 Ω
AF characteristics
Modulation
Compander system
Nominal/peak deviation
MPX pilot tone (frequency/deviation)
AF frequency response
AF input BAL AF IN L (I)/BAL AF IN R (II)
Max. input level
THD (at 1 kHz and nominal deviation)
Signal-to-noise ratio
at nominal load and peak deviation
AF output LOOP OUT BAL L (I)/LOOP OUT BAL R (II)
Overall device
Temperature range
Power supply
Current consumption
Dimensions
Weight
36
516–558, 558–626, 626–698, 718–790, 790–865 MHz
(Aw to Dw, Gw, see page 4)
up to 3,000 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 32 factory-preset channels
6 frequency banks, each with up to 32 user programmable
channels
up to 75 MHz
±10 ppm (–10 °C to +55 °C)
BNC socket, 50 Ω
typ. 10/30/50 mW (Low/Standard/High), switchable
wideband FM stereo (MPX pilot tone)
Sennheiser HDX
±24 kHz/±48 kHz
19 kHz/±5 kHz
25 Hz to 15 kHz
2 x XLR-3/¼'' (6.3 mm) jack combo socket,
electronically balanced
+22 dBu
< 0.9 %
> 90 dB
¼'' (6.3 mm) stereo jack socket, balanced
–10 °C to + 55 °C
100–240 V~
SR 2000: 0.1 A
SR 2050: 0.2 A
approx. 217 x 483 x 43 mm
SR 2000: approx. 2500 g
SR 2050: approx. 2700 g