Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual page 12

Putting the transmitter into operation
1
10
• 2 BNC extension cables (screw-in BNC socket
• 2 antenna holders ,
• 4 screws,
• 2 washers ,
• 2 nuts .
Guide the BNC connector
"ear" .
Connect the BNC connector
Screw the antenna holder
nut .
Secure the antenna holder
the supplied screws.
If you are using the SR 2050 IEM twin transmitter:
Mount the second BNC extension cable in the same way.
1
Slide the transmitter into the 19" rack.
to BNC connector
of the BNC extension cable through the hole in the rack mount
to the antenna output
to the BNC socket using the supplied washer
to the rack mount "ear"
),
.
of the transmitter using two of
and