Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual page 21

Display Function of the menu item
Main menu "Menu"
Sensitivity Adjusts the input sensitivity (0 to –42 dB in steps of 3 dB)
Mode Selects mono or stereo operation
Easy Setup Deactivates the RF signal and activates the Easy Setup Sync
function
Frequency Preset Sets the frequency bank and the channel
Name Enters a freely selectable name
Equalizer Changes the frequency response of the output signal using a
graphic equalizer (+/– 12 dB in steps of 2.4 dB)
AutoLock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu
Exit Exits the operating menu and returns to the standard display
Extended menu "Advanced
Tune Sets the transmission frequencies for the frequency banks
"U1" to "U6"
Sets the frequency bank, the channel and the transmission
frequency (frequency banks "U1" to "U6")
Sync Settings Adjusts the receiver parameters and activates/deactivates
their transfer to the receivers
RF Power Adjusts the transmission power (Low, Standard or High)
Warnings Calls up "Warnings" (see below)
LCD Contrast Adjusts the contrast of the display panel (adjustable in 16
steps)
Reset Resets the settings made in the operating menu
IP-Address Adjusts the IP address of the transmitter
Software Revision Displays the current software revision
Exit Exits the extended menu
main menu
"Warnings"
Activates/deactivates warnings (color change and warning messages)
AF Peak Audio overmodulation
RF Mute RF signal is deactivated
Exit Exits "Warnings" and returns to the extended menu
"Advanced
"Advanced
Menu"
"Advanced
Menu"
Using the operating menu
Menu"
Menu" and returns to the
Page
22
22
22
30
23
24
24
25
25
–
25
25
26
27
28
28
28
28
29
29
–
28
19