Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual page 18

Using the transmitter
16
When carrying out the
channel setting as well as the receiver parameters adjusted via the
submenu (see page 27) are transferred to the EK 2000 IEM receiver via the infra-red
interface.
Carrying out an Easy Setup Sync or a Sync function
The following assumes that you are using the
channel system. You can also use the
transmission link between one transmitter and one EK 2000 IEM receiver.
Easy Setup Sync
Switch all transmitters and one receiver
on.
On all transmitters, call up the
Setup" menu item.
The text "Easy Setup Sync" and the
icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is
automatically deactivated.
Use your receiver to perform a frequency
preset scan (Scan New List).
Select a channel within a frequency bank
with a sufficient number of unused
channels (Current List).
Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface of the first transmitter.
Sync function, the transmitter's current frequency bank and
Easy Setup Sync
Easy Setup Sync
Sync
Switch the transmitter and the receiver
on.
"Easy Press
transmitter.
The
panel of the transmitter.
–
Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface
"Sync Settings"
function for setting up a multi-
function for establishing a
the button on
icon appears on the display
of your transmitter.
the