Toro 07352 Installation Instructions Manual

Deluxe hard cab doors, these door kits are intended to be used on the following cab: workman md series cab 07328, sliding/solid window door kit

Download this manual

These door kits are intended to

be used on the following cab :

TORO WORKMAN

MD Series cab

07328

This cab is manufactured for TORO

by Jodale Perry Corporation.

TORO DELUXE HARD CAB DOORS

Safety instructions/Specifications....................................2

Installation instructions.................................................3

Warranty statement.....................................................5

Model's 07352 & 07353

Installation Instructions

Table of contents

3362-138 Rev A

Sliding Window Door

Kit Model 07352

Solid Window Door

Kit Model 07353

Page 1 : ® TORO WORKMAN MD Series cab 07328 Sliding Window Door Kit Model 07352 Solid Window Door Kit Model 07353 Table of contents Safety instructions/Specifications..…………………………….2 Installation instructions…………….……………………………3 This cab is manufactured for TORO by Jodale Perry Corporation. Warranty statement……………………………………………..5...
Page 2: Safety Instructions
• Mounts to cab on quick attach hinges. • 07352 Door kit has a drivers side sliding access window. • Weight of each door kit adds 84 pounds to vehicle GVW and reduces rated capacity by the same...
Page 3: Installation Instructions
3362-138 Installation Instructions Install brass washers on all 4 door pins. See Figure 1. Install brass washers on door pins Figure 1 Install ball studs into tabs provided in cab frame. Figure 2. Door ball stud Figure 2 Install doors on cab by door pins with the hinge part of the door.
Page 4 Installation Instructions Install the door air shock onto ball stud in door as shown in Figure 4. Then install other end of air shock on to cab ball stud. NOTE: Do not over stress glass by trying to install air shock on to cab as glass may shatter.

07353