Table of Contents
Advertisement
Figure 30. Removing the integrated storage controller card
1. integrated storage controller cable
3. integrated storage controller card connector on the system
board
Next steps
1. Install the expansion card riser 1.
2. Install the cooling shroud.
3. Installing the integrated storage controller card.
4. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Removing the cooling shroud
Removing expansion card risers
Installing expansion card risers
Installing the cooling shroud
After working inside your system
Related reference
Safety instructions
Installing the integrated storage controller card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
2. integrated storage controller card
4. integrated storage controller card holder
Installing and removing system components
85
Advertisement
Table of Contents
Troubleshooting
