Digital Selective Calling (Dsc); Dsc Address Id - Icom IC-M510E Instruction Manual

Vhf marine transceivers
Hide thumbs Also See for IC-M510E:
Table of Contents

Advertisement

7

DIGITAL SELECTIVE CALLING (DSC)

■ DSC address ID

D Entering an Individual or Group ID
You can enter a total of 75 Individual IDs and 25 Group IDs, and assign names to them of
up to 10 characters.
1.
Open the "Individual ID" or "Group ID" screen.
[MENU] > Settings > DSC > Individual ID
[MENU] > Settings > DSC > Group ID
• "No ID" is displayed if no ID is entered.
2.
Push
Add
• The ID entry screen is displayed.
3.
Enter an Individual or Group ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] or [CH/ENT] to set the selected number.
• Select "←" or "→" on the screen, or rotate [CH/ENT]
to move the cursor.
NOTE:
• For a Group ID, the fi rst digit is fi xed as "0."
• For any coast station ID, the fi rst two digits are fi xed as "0."
4.
Push
Next
TIP:
• Select
enter symbols.
• Select a number, character, or space using [▲], [▼],
[◄], and [►].
• Push [ENT] or [CH/ENT] to enter the selected
number or character.
• Select "←" or "→" on the screen to move the cursor,
or to select the entered character.
5.
After entering, select
[CH/ENT] to save, and return to the previous screen.
• The entered name is displayed.
19
.
to start entering the ID's name.
to enter numbers and letters, and
Finish
, and then push [ENT] or
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-m510Ic-m510 evo

Table of Contents