Entering The Atis Id (For Nld And Frg Versions) - Icom IC-M510E Instruction Manual

3
PREPARATIONS
■ Entering the ATIS ID
(For NLD and FRG versions)
The Automatic Transmitter Identification System (ATIS) ID consists of 10 digits. You can
enter the ID in the "ATIS ID Input" item on the Menu screen.
This ID entering can be done only once.
If your ATIS ID has already been entered, doing the steps below is not necessary.
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼], or rotate [DIAL] to select "ATIS ID
Input," then push [ENT] to start entering.
• The "ATIS ID Input" screen is displayed.
3. Enter your ATIS ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] or [CH/ENT] to enter the selected
number.
• Select "←" or "→" on the screen, or rotate
[CH/ENT] to move the cursor.
4. Repeat step 3 to enter all 10 digits.
5. Push Finish
• The "Confirmation" screen is displayed.
6. Enter your ATIS ID again to confirm.
7. Push
Finish
• When your ATIS ID is successfully entered, the
screen displays "ATIS ID registered successfully.,"
and then enters the operating screen.
L You can check the ATIS ID in "Radio Info" on the
Menu screen.
9
to set the entered ID.
to set the entered ID.