Table of Contents
Advertisement
■ AquaQuake Water Draining function
Water in the speaker grill may muffl e the sound coming from the speaker. The
AquaQuake Water Draining function removes water from the speaker grill by vibrating the
speaker cone.
CAUTION: DO NOT use the AquaQuake Water Draining function when an external
speaker is connected.
1.
Push [◄] or [►] to display
2.
Hold down
AquaQuake
• A low frequency vibration beep sounds to drain the
water, regardless of the volume level setting.
L This function is activated for a maximum of 10
seconds, even if you continue to hold down
AquaQuake .
3.
Release the key to turn OFF the function.
■ Editing a channel name
You can edit the name of each operating channel and weather channel, using numbers,
uppercase letters, symbols, and a space. This enables easy recognition of the channels
or stations. All VHF marine channels are set with default names.
1.
Push [▲] or [▼], or rotate [CH/ENT] to select the channel to edit.
2.
Push [◄] or [►] to display
L You cannot edit a channel name during Dualwatch, Tri-watch, or a scan.
3.
Push
.
CH Name
• The "Channel Name" screen is displayed.
4.
Edit the channel name.
5.
Select
Finish
, and then push [ENT] or [CH/ENT] to
save the edited name and return to the operating
screen.
TIP:
• Select
to enter numbers and letters, and
• Select a number, character, or space using [▲], [▼], [◄], and [►].
• Push [ENT] or [CH/ENT] to enter the selected number or character.
• Select "←" or "→" on the screen or rotate [CH/ENT] to move the cursor, or to select
the entered character.
AquaQuake
.
to turn ON the function.
CH Name
.
BASIC OPERATIONS
to enter symbols.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
14
Advertisement
Table of Contents
