Table of Contents
Advertisement
11
WLAN SETTINg
D Setting the WLAN in the Client mode
1.
Open the "Configuration" screen.
[MENU] > Settings > WLAN > Advanced Settings >
Confi guration
2.
Select "Client."
L When "Requires reconfi gure the phone. Change
setting?" is displayed, Push
• The transceiver starts searching the access point.
3.
A list of the network device is displayed.
4.
Push [▲] or [▼], or rotate [CH/ENT] to select the
access point (SSID) and then push [ENT], or [CH/ENT].
5.
Select "Auto."
• The transceiver starts connecting to the access point.
L If you select the "Manual," enter the IP Address and
the Subnet Mask.
L If necessary, enter the password.
6.
"Connection successful." is displayed when the
transceiver and the access point are connected.
L When the WLAN connection is successful,
the "
" icon is displayed at the top of the Standby
screen.
NOTE: The default gateway settings
• When the DHCP server function of the access point is set to "Enable," enter the default
gateway IP address.
• When you set your mobile device's IP address as the static IP address, set a default
gateway IP address of the mobile device.
91
OK .
Advertisement
Table of Contents
