Aquaquake Water Draining Function; Editing A Channel Name - Icom M-330GE Instruction Manual

4
BASIC OPERATION
■ AquaQuake Water Draining
function
Water in the speaker grill may muffle the sound coming
from the speaker. The AquaQuake Water Draining function
removes water from the speaker grill by vibrating the speaker
cone.
CAUTION: DO NOT use the AquaQuake Water Draining
function when an external speaker is connected.
1. Push [◄] or [►] to display
2. Hold down AQUA
• A low frequency vibration beep sounds to drain the water,
regardless of the volume level setting.
L This function is activated for a maximum of 10 seconds,
even if you continue to hold down
3. Release the key to turn OFF the function.
14
.
AQUA
to turn ON the function.
AQUA
.

■ Editing a channel name

You can edit the name of each operating channel and weather
channel, using numbers, uppercase letters, symbols, and
a space. This enables easy recognition of the channels or
stations. All VHF marine channels are set with default names.
1. Push [▲] or [▼] to select the channel to edit.
2. Push [◄] or [►] to display
L You cannot edit a channel name during Dualwatch, Tri-watch,
or a scan.
3. Push .
NAME
• The "CHANNEL NAME" screen is displayed.
4. Edit the channel name.
TIP:
!$?
• Select to enter symbols, and select
numbers and letters.
• Select characters or a space using [▲]/[▼]/[◄]/[►].
• Select "◄" or "►" to scroll.
• Push [ENT] to enter the selected character.
• Select "←" or "→," or rotate [DIAL] to move the cursor.
EXIT
• Push to cancel editing.
5. Push FIN to save the edited name and return to the
operating screen.
NAME .
123
to enter