Philips CRYSTAL 650 User Manual page 7

Handling and Maintenance
¿
Never attempt to perform repairs on the machine
yourself. Improper maintenance can result in ma-
chine damage, fire or electrical shock (see Appendix /
Warranty). Only have your device repaired by an au-
thorised service centre.
¿
Do not press forcefully on the scanner cover when
you scan thicker documents or three-dimensional
items, this could damage the scanner cover and/or the
scanner glass.
¿
Never open the paper jam door while the
multifunction machine is printing.
¿
If you have not inserted any paper, the multifunction
machine attempts to load paper upon receiving a
job; never open the paper jam door at this time. Insert
paper.
¿
Use care when operating, storing or transporting
the multifunction machine, always keeping it in a
horizontal position; otherwise ink may leak out.
¿
Before cleaning the surface, disconnect the ma-
chine from the telephone and power networks.
Never use liquid, gaseous or easily flammable cleansers
(sprays, abrasives, polishes, alcohol) to prevent damage
to painted parts.
¿
Use a soft, dry cloth to clean the display. If the display
breaks, a mildly corrosive liquid may escape. Should
you come into contact with this liquid, rinse the affected
areas with large amounts of water. If complaints or vi-
sion problems occur, consult a physician immediately.
Ink Cartridges
¿
When loading original ink cartridges for the first
time, always use the enclosed Plug'n'Print card;
only this way is all necessary information saved to al-
low for faultless replacement and reuse of the cartridges.
Other ink cartridges may damage the device (see Ap-
pendix / Warranty).
¿
Store temporarily removed cartridges either in the
photo cartridge storage box or pack them individu-
ally in closed plastic bags. For safety reasons, always
keep ink cartridges out of the reach of children.
¿
Handle used ink cartridges carefully to prevent get-
ting ink on clothing or other objects. Do not shake
the ink cartridges. Avoid all contact with your skin and
eyes. Remove ink flecks with large amounts of water. If
complaints or vision problems occur, consult a physi-
cian immediately.
¿
Do not perform any alterations on the original ink
cartridges; this can damage the printing heads.
¿
Take the ink cartridges out of the machine during
transport.
¿
Dispose of the empty cartridges according to the
regulations of your country.
Safety Instructions
Photo Memory Media
¿
Only use memory media that are compatible with
the multifunction machine (see section Machine
Functions / Photo Printer / Using Photo Memory
Media).
¿
Never use more than one storage medium at a
time!
¿
Never interrupt the connection between the photo
memory medium and the multifunction machine
while data on the memory medium is being accessed.
Do not disconnect the machine from the power sup-
ply.
¿
Never pull out the memory card while the
multifunction machine is accessing it and execut-
ing the print job. This could cause data to be damaged
or lost.
¿
Be sure to read the operating instructions for your
storage medium to ensure proper use.
General Information
¿
The power load on all USB ports may not exceed
0.7 amperes to ensure USB functionality. Do not
connect more than one high-power device to your
multifunction machine at a time. Do not connect ad-
ditional devices—such as batteries, fans, charging de-
vices—to your multifunction machine.
¿
If you would like to use an additional cordless
tele phone, keep the base station of the cordless
tele phone at least 15 cm away from the multifunction
machine, otherwise acoustic disruptions may occur in
the telephone handset.
¿
This electronic device contains many materials that
can be recycled. When you wish to dispose of the
machine, please obtain information on the regulations
in your country for the recycling of electronic equip-
ment.
¿
If you have a pacemaker and experience discom-
fort, stay away from the multifunction machine
and consult your doctor.
¿
Your multifunction machine has been tested in
conformity with standards EN 60950-1 and IEC
60950-1 and should only be operated with telephone
systems and power equipment that meet these stand-
ards.
¿
The multifunction machine was developed exclu-
sively for use in the indicated sales region. It con-
forms to the regulations of the telephone company of
the country. Do not make any changes or settings that
are not described in this user manual.
7