Reading Image Files; Printing Dpof Files - Philips CRYSTAL 650 User Manual

Transmitting Image Files
via Bluetooth
You can send files to your multifunction machine for
printing from all devices (e.g. camera phones, handhelds)
that are Bluetooth-capable ( OBEX protocol).
Æ
Bluetooth is optional and functions only
with an original adapter, which you can pur-
chase through our order service (see the back
page of this user manual). More information:
www.fax.philips.com
Activate Bluetooth on your multifunction machine
1
by pressing MENU/OK and 931. Use / to
select ON and confirm with OK.
2 Connect the original Bluetooth adapter to the USB
port on the side of your multifunction machine.
Æ
The power load on all USB ports may not
exceed 0.7 amperes to ensure USB func-
tionality. Do not connect more than one
high-power device to your multifunction
machine at a time.
Never use more than one storage medium at a
time!
For good transmission performance, the distance
between the devices should not exceed 10 m.
Activate Bluetooth on your mobile device and en-
3
ter the preset password (= 1234) for your Bluetooth
connection.
Optional: If you would like to protect the Bluetooth
connection with a different password, press
MENU/OK and 932 on your multifunction
machine. Enter the new password and confirm
with OK.
On the mobile device, select the image files you
4
would like to send. Please consult the user manual
of your mobile device for precise instructions.
5 Confirm with OK to access the photo menu of
your multifunction machine (see also Printing Im-
age Files from the Photo Menu).
5. Photo Printer

Reading Image Files

After you have established the data transmission in
one of the ways described above, a message appears on
the display indicating the number of image files your
multifunction machine has detected (up to 999). Your
multifunction machine automatically detects existing
DPOF files and PictBridge signals. You can also print
out your photos from the photo menu.
²
For large amounts of data, reading of the
photos may take a few moments.

Printing DPOF Files

Your multifunction machine meets the DPOF (Di-
rect Print Order Format) standard (file format 1.10).
With the digital print order format DPOF you can se-
lect photos for printing directly on your digital cam-
era and configure the desired settings. The machine
reads the DPOF files on the memory card and detects
which photos have been selected for printing. If you
print DPOF files with your multifunction machine, the
print settings of your machine are overwritten, i.e. the
selected image files are printed with the DOPF settings
configured on the digital camera.
Æ
If your multifunction machine does not sup-
port any of the configured DPOF options, the
display will show possible print settings or the
print job will not be executed. Please note the
printing parameters of your multifunction ma-
chine (see Requirements).
Start the DPOF printout by confirming PRINT
1
DPOF with OK on your multifunction machine.
Use / to select the desired paper format of the
2
printout and confirm with OK.
Use / to select whether you want to use normal
3
or coated paper, photo paper or a transparency.
Confirm the selected paper type with OK. PHOTO
For Colour printout with Crystal Image: If you
4
want Crystal Image to implement the red eye re-
duction, use / to select REDUCTION and con-
firm with OK.
5 Your multifunction machine starts printing.
²
If you would like to access the print settings of
your multifunction machine, you can load the
photo menu by using / to select Photo menu
and confirming with OK.
* Bluetooth is optional and function only with an original adapter available through
our order service (see back page of this user manual). More information: www.fax.philips.com
10×15 cm
27