Fax Switch; Setting Sm Modes; Activating The Timer U; Setting The Fax Reception Mode - Philips CRYSTAL 650 User Manual

7. 7.

Fax Switch

The active fax switch allows you to use and control addi-
tional devices (e.g. external answering machines or tele-
phones) that are connected to the same telephone line
as your multifunction machine. The fax switch checks
whether an incoming call is a fax transmission or a call,
independently forwards the call to the respective device
and determines the ringing behaviour of the additional
devices. While the multifunction machine is checking
the call, it continues to ring.
With the modes S (day) and M (night), you can speci-
fy how often your multifunction machine should ring
in the respective mode before it picks up and receives
faxes (e.g. you can receive faxes silently (= without ring)
to avoid being disturbed).
With activated timer function U, your multifunction
machine automatically switches between modes
S (day) and M (night).

Setting SM Modes

With the following functions, you can set the number
and volume of rings for the modes S (day) and
M (night), thereby configuring the ringing behaviour
to your personal rhythm.
Display Setting Options
TOTAL RINGS 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
FAX RINGS 0, 1, 2, 3, 4, 5, Manual
RINGER VOL. Off, low, high
1 Select function 61 (S day) by pressing MENU/
OK and 61.
Use / to select Fax rings and confirm with
2
OK. Use the number keypad (or /) to enter the
number of rings after which the fax switch sepa-
rates faxes from calls. Press OK.
Use / to select total rings and confirm with
3
OK. Use the number keypad (or /) to enter the
total number of rings. That is the number of rings
before the multifunction machine starts the fax
reception (including "silent" faxes) or takes a call.
Confirm with OK.
Use / to select RINGER VOL. and confirm with
4
OK. You can select between three volume levels
with /. Save with OK.
²
You can also change the volume of the ring
tones while the machine is in the starting
mode: Press / and select the desired volume.
Confirm with OK.
5 Select function 62 (M night) by pressing MENU/
OK and 62. Repeat steps 2 to 4.
7. Fax Switch
²

Activating the Timer U

With the timer function, you can individually configure
the durations for the modes S (day) and M (night).
If the timer U is activated, the device automatically
switches between day and night modes.
The display shows the current mode. To switch the
timer on or off, press the U/M/S button until the
symbol U appears or disappears on the display.
Æ
1
2
3
²
Setting the Fax
Reception Mode
FAX RINGS 3
Silent Fax Reception
If you would like to receive faxes without ringing first,
set the number of rings to 0 under fax rings. Your
multifunction machine will not ring.
TOTAL RINGS 5
Silent Ring Setting $
If you would like to not be disturbed by incoming calls
high
or faxes, for instance at night, you can set the number of
rings to 0 for both call types (fax rings and total
rings). Your machine automatically switches to silent
fax reception and even external devices (e.g. telephones,
answering machines) will not ring.
Æ
Return to the last menu entry with C; return
to the starting mode with X.
If you cannot receive any faxes, you may have set
both ring numbers too high (see steps 2 and 3).
Set the number of rings to a value less than 5.
The timer is programmed at the factory such
that your machine switches to night mode
(M/U) at 10:00 pm and returns to day mode
(S/U) at 7:00 am.
Select function 63 by pressing MENU/OK and
63.
Use / to select DAY TIME and confirm with OK.
Use the number keypad (or /) to enter the time
at which the machine should switch to S (day)
(e.g. 08 00 for 8:00 am) and save with OK.
Use / to select night TIME and confirm with
OK. Use the number keypad (or /) to enter
the time at which the machine should switch to
M (night) (e.g. 23 30 for 11:30 pm) and
save with OK.
Return to the last menu entry with C; return
to the starting mode with X.
With this setting, you are not reachable via
externally connected telephones. No messages
are recorded on your external answering machine.
However, you can continue to receive faxes, and
Text2Fax/SMS/MMS messages*.
* SMS—Crystal 660 (depending on country and network)
MMS—Crystal 660 (depending on country and network)
Text2Fax—Crystal 660 (depending on country and network)
33