Aligning Cartridges; Connecting Additional Devices - Philips CRYSTAL 650 User Manual

Close the holder. You will hear a click when the
5
cover of the holder snaps into place.
Close the machine
6
Æ
If the error message CHANGE CARTRIDGE
POSITIONS appears on the display, you
have inserted the cartridges incorrectly. Open
the machine and insert the cartridges correctly
(see steps 1 to 6).

Aligning Cartridges

Press OK. After the ink cartridges are inserted, your
multifunction machine prints out a test page and auto-
matically configures the correct parameters for the best
possible printing result; this process can take some time.
Remove the test page. This completes the installation
process.
Connecting Additional
Devices
You can operate other devices on a telephone line in
addition to your multifunction machine, for instance
cordless telephones, answering machines, charge
counters or modems.
If you are operating an additional cordless telephone on
the same telephone line that is SMS/MMS-capable*, it
is not possible to predict with certainty whether SMS/
MMS messages* will be received on your multifunction
machine or the cordless telephone. SMS/MMS recep-
tion* is only possible on one device. Attempt to de-
activate SMS/MMS reception* on the additional cord-
18 * SMS—Crystal 660 (depending on country and network)
MMS—Crystal 660 (depending on country and network)
less telephone. If this is not possible, do not connect
an additional SMS/MMS-capable device* to your
multifunction machine in order to ensure proper func-
tioning.
If you would like to use special peripheral equipment
with your multifunction machine, you should contact
a specialised dealer.
Connection to the
Multifunction Machine
You can connect additional devices directly to your
multifunction machine. Insert the telephone cord of
the additional device into the EXT. socket on the back
side of your multifunction machine.
²
We recommend connecting additional de-
vices directly to the multifunction machine
because its built-in active fax switch will then
function optimally and is capable of controlling
the additional devices (see chapter Fax Switch /
Setting the Fax Reception Mode).
Connection to the
Telephone Line
If you connect additional telecommunications de-
vices to the same telephone wall socket, make sure the
multifunction machine is the first device connected to
the line.
In GB
1. Installation