Positioning Printing Media And Documents; Connecting The Telephone Cord - Philips CRYSTAL 650 User Manual

1 Open the scanner cover.
Lay the document onto the scanner glass with the
2
written side down.
3 Align the document with the rear left corner of the
scanner glass (arrow marks).
The markings on the scanner border for the A4 and
4
A5 formats will help you to position the document
correctly.
1. Installation
Close the scanner cover.
5
²
The scanner cover is equipped with adjust-
able hinges, allowing you to lay even thicker
documents (e.g. books) in the flatbed scanner.
Carefully lift the scanner cover so that it rests as
evenly as possibly.
Use clear sheets of plastic when copying three-
dimensional objects (e.g. coins, flowers) to avoid
damaging the scanner glass.
Positioning Printing
Media and Documents
Position the document with the long edge against the
back side of the scanner glass. Insert the paper into the
paper tray with the short side out. This is particularly
important for printing photos in the 10×15 format!
Connecting the
Telephone Cord
Connect the telephone cord to the multifunction ma-
chine by inserting the small plug of the telephone cord
into the socket designated by the word LINE on the
rear side of the machine. Insert the telephone plug into
your PTT line socket.
In GB
15