Table of Contents
Advertisement
Entering the Date
and Time
When the multifunction machine is in the starting
mode, the date and time are shown on the display.
Æ
Note the order for entering the date and time:
day—month—year—hour—minute
digits).
1
Enter the date and time with the number keypad
and confirm the entry with OK (e.g. press 08
08 05 14 00 for August 8, 2005,
2:00 pm).
If you have entered an incorrect number, you can
2
correct the entry with / and C.
3
Confirm with OK.
²
If the power supply is interrupted (e.g. after
a power failure), you must enter the date and
time again.
Inserting Cartridges
Ink cartridges must be installed in your multifunction
machine for scanning, copying and printing. Two ink
cartridges (black and colour) have been included with
your machine to allow you to use these functions right
away. The ink level memory for the cartridges is preset
at the factory. You do not need a Plug'n'Print card to
update the cartridges. For instructions on changing car-
tridges or inserting a photo cartridge, please consult the
chapter Troubleshooting.
Æ
When first setting up your machine, only use
the ink cartridges included in the package!
1
Crystal 660: Fold the colour display back to the
original position.
Open the machine by taking hold of the moulded
grip under the machine cover ...
1. Installation
... and lifting the housing upward.
(two
Press on the spring catch of the cartridge holder to
2
open it.
3
Take the ink cartridges out of the packaging, re-
move the packaging material and carefully pull off
the protective strip.
Æ
Please make certain that the protective strip
has been completely removed. Be careful not
to touch the nozzles or contacts.
Insert the cartridges with the "nose" pointing down
4
and tilted back at an angle; the black cartridge
on the left, the colour cartridge on the right.
17
Hide quick links:
Advertisement
Table of Contents
