Changing The Sms Settings - Philips CRYSTAL 650 User Manual

Press » twice (or MENU/OK, 51 and
1
OK). Enter the text that you would like to send
as described under Sending SMS Messages. Press
OK.
Enter the telephone number of the recipient or se-
2
lect an entry from the telephone book (m). Con-
firm with OK.
Enter the name of the user account of the recipient.
3
Press »; your SMS message is sent.
Changing the SMS
Settings
You can change the factory settings with the following
functions.
²
We recommend changing the standard set-
tings only in event of frequent use.
SMS Provider
All the numbers that you need for sending and receiv-
ing SMS messages are stored in your multifunction ma-
chine at the factory. If you would like to switch to a dif-
ferent telephone provider or receive SMS messages from
other providers as well, you must save the correspond-
ing numbers for the SMS centre (you can obtain the
required information from your telephone provider).
Press MENU/OK and 551.
1
Use / to select send no. and confirm with
2
OK. Enter the number that your machine must
dial to send an SMS. Confirm with OK.
Use / to select receive no. and confirm with
3
OK. Enter the provider number that your machine
must dial to receive an SMS. Confirm with OK.
4 You can also receive SMS messages from a second
SMS centre. Press MENU/OK, 552 and OK,
then confirm with OK. Enter the second provider
number for SMS reception.
Return to the last menu entry with C; return to the
5
starting mode with X.
Automatic SMS Printout
Your multifunction machine automatically prints out
SMS messages. You can deactivate the automatic print-
out.
Press MENU/OK and 553.
1
Use / to select off and confirm with OK. SMS
2
messages are received and saved in memory.
²
Return to the last menu entry with C; return
to the starting mode with X.
9. SMS
Name of the Sender
If you do not want your sender identification (= header)
to appear on outgoing SMS messages, you can suppress
the display of the header:
Press MENU/OK and 554.
1
Use / to select off and confirm with OK. The
2
header will be suppressed.
²
Please note that your sender identification
counts as text and reduces the number of
characters available for your SMS message.
Return to the last menu entry with C; return to
the starting mode with X.
Receipt Confirmation
You can request a receipt confirmation of when the
SMS centre has forwarded your SMS message to the
recipient or the validity period has expired.
Æ
The receipt confirmation is not a confirmation
that the message has been read!
Requesting a receipt confirmation may be associ-
ated with a fee. Contact your telephone provider
for such information.
Press MENU/OK and 555.
1
Use / to select on and press OK. To deactivate
2
the receipt confirmation, repeat the process and se-
lect off.
²
Return to the last menu entry with C; return
to the starting mode with X.
Sub-address (Terminal ID)
(depending on country and network)
If you have several devices with SMS functionality con-
nected to one tele phone line, you can assign sub-ad-
dresses to these devices. SMS messages can then be sent
to a specific device.
Press MENU/OK and 556.
1
Enter a number from 0 to 9 as the sub-address.
2
The sender can send an SMS message directly to
this device by appending the sub-address to the tel-
ephone number. Confirm with OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
Validity Period
With the function 557, you can specify the duration
for which your SMS should remain saved on the server
of the SMS centre if the recipient is not available. Dur-
ing the configured period, the centre will attempt to
forward the SMS message to the recipient. If your SMS
message cannot be delivered within the validity period,
the SMS message will be deleted from the server.
41