Changing The Copy Settings - Philips CRYSTAL 650 User Manual

10 Use / to select whether you want to copy onto
normal or coated paper, photo paper or a transpar-
ency. Confirm with OK.
²
The printing result also depends on the print-
ing medium used. Use appropriate paper to
achieve the best results.
11 For colour copy with Crystal Image: If you want
Crystal Image to implement the red eye reduction,
use / to select REDUCTION and confirm with
OK.
²
Red eye reduction is a complex process and
can take some time. Confirm the query only
when needed.
12 The copy is created with the defined custom set-
tings.
²
Press K (or the Y button), to start the copy-
ing from any step in the process. With the
X button, you can cancel the copy process and
return to the starting mode.
Changing the Copy
Settings
All custom settings are reset to the factory settings after
the copy is created, unless you save them as the new
standard settings.
Setting the Resolution
1 The standard setting for the resolution (factory
setting: NORMAL) can be changed by pressing
MENU/OK and 251.
Use / to select the desired resolution and con-
2
firm with OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
Setting the scan format
The standard setting for the scan format can be
1
changed by pressing MENU/OK and 252.
Use / to select the format of the loaded docu-
2
ment. Confirm with OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
Setting the Zoom Parameter
The standard setting for the zoom function
1
(factory setting: 100%) can be changed by pressing
MENU/OK and 253.
24
Use / to select the scaling value (25%—400%),
2
or set the scaling value yourself. Confirm with OK.
PHOTO
²
Return to the last menu entry with C; return
to the starting mode with X.
Setting the Saturation
(for colour copies)
Æ
The saturation is measured in relation to the
contrast: - diminishes the colour (down to
the grey range), + intensifies the colour.
1 The standard setting for the saturation (factory set-
ting: medium saturation) can be changed by press-
ing MENU/OK and 254.
Use / to select the desired colour intensity.
2
Confirm with OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
Setting the Brightness
Æ
- makes the printout darker, + brightens the
printout.
The standard setting for brightness (factory setting:
1
medium brightness) can be changed by pressing
MENU/OK and 255.
Use / to select the desired level of brightness.
2
Confirm with OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
Reducing the Moire effect
You can copy your document with double resolution in
order to prevent stripes (= Moire effect) appearing on
QUALITY
your printout.
Press MENU/OK and 256.
1
Use / to select reduction, and confirm with
2
OK.
²
Return to the last menu entry with C; return
to the starting mode with X.
4. Copier