Mms; Mms Requirements; Sending Mms Messages - Philips CRYSTAL 650 User Manual

MMS »
10. 10.
(Crystal 660; depending on country and network)
You can send and receive MMS (Multimedia Message
Service) messages with your multifunction machine. As
a multimedia extension of SMS, MMS allows you to
combine text and images into messages. With the fixed
network MMS service, you can send these multimedia
messages to lines in the fixed network (analogue devices
and ISDN systems) and in mobile networks. You can
also send MMS messages to e-mail addresses.

MMS Requirements

Your machine is preconfigured at the factory for the use
of the fixed network MMS service. No special registra-
tion is required. Should problems arise, please contact
your telephone provider or check the settings of your
machine (see also Changing the MMS Settings).
Information on MMS Operation:
¿
To be able to send and receive MMS messages, the
SMS function must be activated for your line and
must be functioning properly (see chapter SMS / SMS
Requirements).
¿
If you operate your multifunction machine on a pri-
vate branch exchange, make certain that you have
selected PABX as your telephone line type (see chapter
Settings / Private Branch Exchange (PABX)). It is pos-
sible that you will not be able to send and receive MMS
messages from a private branch exchange (depending
on the country and network).
¿
Your multifunction machine will be automatically
registered the first time it sends an MMS message.
First send a test MMS to your own telephone number
to register your machine for the MMS service and test
the functionality.
¿
Please note that not all fixed network providers are
connected to the fixed network MMS service!
¿
Should problems occur with MMS transmissions,
the problem could be that you are using a private
number or your multifunction machine is operating on
an older ISDN system that does not support CLIP (see
chapter SMS / SMS Requirements).
¿
If the terminal device of the recipient is not MMS-
capable, the subscriber will receive an SMS message
indicating an Internet address where the MMS message
may be retrieved or viewed.
¿
The data volume for transmissions within the fixed
network (up to 500 kB) and to mobile telephones
(up to 100 kB) depends on the provider. Contact your
telephone provider for more information.

10. MMS

¿
The transmission time for an MMS message de-
pends on the modem speed, the data volume and
the line quality. With a transmission rate of 33.600 bps,
your multifunction machine contributes to keeping the
transmission time short.
Consult your service provider about
• which mobile or fixed network providers you can
send MMS messages to and which providers you
can receive MMS messages from,
• what costs may be charged for sending and pos-
sibly for receiving an MMS message,
• what quantities of data you can transmit,
• which services and functions are available.

Sending MMS Messages

Create your individual MMS message by entering text
and attaching an image of your choice (in the formats
A4, A5, photo (10×15) or business card size).
Æ
The data volume of your MMS message is
limited (see also MMS Requirements). Also
note the format restrictions for mobile devices.
For detailed information, contact your telephone
provider.
Press » and use / to select MMS. Confirm
1
with OK.
Use / to select whether you would like to scan
2
the image for your MMS message or select an im-
age from a memory card. Confirm with OK.
Scanning an Image
Lay the document onto the flatbed scanner with
a
the written side facing down (see chapter Installa-
tion / Loading Documents).
Use / to select the desired document format and
b
confirm with OK. A5
43