Reset; Reload Factory Default Configuration File; Figure 14 Reset And Reload Timeline - ZyXEL Communications NSA-2400 User Manual

2.7.1 Reset

To reset the admin password, NSA-2400 IP address and NSA-2400 subnet mask (only) to the
factory default settings:
1 Use a pointed object to press and hold the RESET button for two seconds. Release the
button when you hear a beep.
2 The DIAG LED turns orange and blinks quickly indicating that the process has started.
3 The NSA-2400 beeps again when finished and the DIAG LED will turn off.

2.7.2 Reload Factory Default Configuration File

Reloading the factory default configuration file resets the admin password, NSA-2400 IP
address and NSA-2400 subnet mask to the default settings AND erases all other
configurations such as user/group/share names, passwords and share access rights. To reload
the factory default configuration file:
1 Use a pointed object to press and hold the RESET button for ten seconds to reload the
factory default file. Release the button when you hear the second beep.
2 The DIAG LED turns orange and blinks quickly indicating that the process has started.
3 The NSA-2400 beeps again when finished and the DIAG LED will turn off.
The NSA-2400 automatically restarts to complete reloading the factory default
configuration file.
Release the RESET button after two seconds (you will hear one beep) to reset the admin
password and NSA-2400 IP address. Release the RESET button after ten seconds (you will
hear two consecutive beeps) to reload the factory default configuration file (resets and erases
all other configurations on the NSA-2400)!

Figure 14 Reset and Reload Timeline

[Beep]
0
Release
Press
to reset
button
You should back up the current NSA-2400 configuration file before resetting or
reloading the factory default configuration file.
NSA-2400 User's Guide
[Beep, Beep]
2
Release
to reload and restart
Chapter 2 Introducing the Web Configurator
10
Seconds
39