ZyXEL Communications NSA-2400 User Manual page 112

Chapter 7 Storage Screens
Table 45 Storage > Disk (continued)
LABEL
Capacity
Status
Action
112
DESCRIPTION
This field shows the size of the hard disk.
This field shows if the hard disk is functioning normally.
Click the Scan Disk icon to scan a hard disk drive for bad sectors and file
system errors.
Note: All users must disconnect from the NSA before the
disk scan can begin.
For external hard disks, there are additional Disconnect, Locate and
Initialize icons.
Make sure to click the Disconnect icon before you remove an external
drive so that you do not lose data that is being transferred to or from that
hard drive.
Click the Locate icon to cause the corresponding USB LED on the NSA to
blink.
Click the Initialize icon for the NSA to create a volume on the (external)
hard drive. You can configure an external disk as either JBOD or
BACKUP only!
NSA-2400 User's Guide