Shutdown; Shutdown Screen; Figure 62 Maintenance > Shutdown; Table 52 Maintenance > Fw Upgrade - ZyXEL Communications NSA-2400 User Manual

The following table describes the labels in this screen.
Table 52 Maintenance > FW Upgrade
LABEL
Firmware Upgrade
Firmware File
Browse
Upgrade

8.7 Shutdown

Use this screen to turn off the NSA-2400 or perform a software restart. A software restart is
faster than turning the NSA-2400 off and then turning it on again. Before shutting down or
restarting, check the System Status > Active Sessions screen to make sure that no one is
logged into the NSA-2400 or transferring files to or from the NSA-2400.

8.7.1 Shutdown Screen

Click the Maintenance link in the Navigation panel and then click the Shutdown link or the
Shutdown tab to access the Maintenance > Shutdown screen.
Figure 62 Maintenance > Shutdown
The following table describes the labels in this screen.
Table 53 Maintenance > Shutdown
LABEL
System Shutdown
Restart
Shutdown
When you click the Restart button a pop-up screen will appear asking you to confirm. Click
OK to continue or Cancel to quit the restart.
NSA-2400 User's Guide
DESCRIPTION
Type the location of the firmware file you want to upload
Click Browse to find the file on your computer
Click Upgrade to upload the new firmware. The
restarts after you upgrade. Wait until the restart completes before
NSA-2400
accessing the again. If you interrupt the upgrade, then the
NSA-2400
may become unusable.
DESCRIPTION
Click Restart to have the device perform a software restart.
Click Shutdown to turn off the NSA-2400.
Chapter 8 Maintenance Screens
NSA-2400
automatically
127