System Info; Figure 18 System Info; Table 11 System Info - ZyXEL Communications NSA-2400 User Manual

Chapter 3 Status Screens

3.4 System Info

Use this screen to view detailed NSA system and hardware information.

Figure 18 System Info

The following table describes the labels in this screen.

Table 11 System Info

LABEL
System Name
Model Name
Firmware Version
BIOS Version
RomFile Checksum
ZLD Checksum
Core Checksum
CPU Info
Flash Memory Size
RAM Memory Size
Hardware Reset Button
IP Address
IP Subnet Mask
Default Gateway
48
DESCRIPTION
This displays the name which helps you find the NSA on the network.
Click the update link to go to the Network> TCP/IP screen. Click the
Modify button after the Server Name label in that screen to go to the
Network > Windows/CIFS in which you can change the Server Name.
You can enter up to 15 alphanumeric characters with minus signs allowed
but not as an end character. The name must begin with an alphabetic
character (a-z) and is not case sensitive.
This displays the NSA model name.
This is the NSA firmware version and the date created. Click the update
link to go to the Maintenance > Firmware Upgrade screen from which
you can upload new firmware.
These four fields are to verify that a correct version of the firmware has
been installed. Customer support may also request this information to
help with troubleshooting.
This displays the type of CPU the NSA has.
This displays the amount of non-volatile flash memory. Flash memory is
used for storing NSA firmware and configuration files.
This displays the amount of (volatile) RAM. The NSA uses RAM during
system runtime.
This displays whether the reset button is enabled or not. Use the reset
button to reset the NSA-2400 (user name to "admin", default password to
"1234", default IP address to 192.168.1.3 with subnet mask of
255.255.255.0) or restore the factory default configuration file (all
configurations, including shares, users, passwords and so on are returned
to the original configurations). Check that the reset button is enabled in
the Maintenance > Configuration screen.
This displays the NSA's IP address.
This displays the NSA's subnet mask.
This displays the NSA's default gateway.
NSA-2400 User's Guide