Scheduler Screens; Scheduler Screen; Scheduler Create/Edit Screen; Figure 46 Protect > Scheduler - ZyXEL Communications NSA-2400 User Manual

6.4 Scheduler Screens

Use these screens to automatically run backups or snapshots at the configured times. It is
recommended you schedule large backups for times when your network is not busy, such as at
night. If two events are configured to run at the same time, then one must wait until the other
finishes running.
The scheduler uses the dates and times you configured on the primary NSA (not the backup)
Maintenance > Date/Time screen. Some backups or snapshots may not run if you change the
NSA date and time after having configured schedules.

6.4.1 Scheduler Screen

Click the Protect link in the Navigation panel and then click the Scheduler sub-link to access
the Protect > Scheduler
Figure 46 Protect > Scheduler
The following table describes the labels in this screen.
Table 34 Protect > Scheduler
LABEL
Status
Job Name
Type
Schedule
Last Run
Next Run
Action
Create a Schedule

6.4.2 Scheduler Create/Edit Screen

Click the Create a New Scheduled Task button in the
new schedule. Click the edit icon in the
schedule.
NSA-2400 User's Guide
summary screen.
DESCRIPTION
This fields shows whether the backup or snapshot has been run yet..
This is the name of the backup or snapshot that's scheduled to be run
automatically.
This displays whether the schedule is for a backup or a snapshot.
This shows the days and times the backup or snapshot will run.
This shows the date and time the backup or snapshot was last run.
This shows the date and time the backup or snapshot will run next..
Click the edit icon to edit an existing schedule or the delete icon to delete
it.
Click this button to create a new schedule.
Protect > Scheduler
Chapter 6 Protect Screens
Protect > Scheduler screen to create a
screen to edit an existing
95