Speed Dial Phone Book Setup; All Contents Copyright (C) 2005 Zyxel Communications Corporation - ZyXEL Communications P-2302HWDL-P1 Support Notes

Speaking Use this field to set the loudness that the Prestige uses for the speech signal
that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Volume
Listening Use this field to set the loudness that the Prestige uses for the speech signal
Volume that it receives from the peer device and sends to your phone. -1 is the
quietest and 1 is the loudest.
SIP 1 and SIP 2 correspond to the Prestige's SIP accounts. Select whether
Outgoing
you want the phone(s) attached to this phone port to use SIP account 1, 2 or
Call use
both when you make a call. If you select both SIP accounts, the Prestige will
first try to use SIP account 2 and then SIP account 1 when you make a call.
G.168 Active Select this check box to cancel the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Select this check box to use Voice Activity Detection (VAD) to reduce the
VAD
bandwidth that a call uses. The Prestige will generate and send comfort
Support
noise when you are not talking.
When you are dialing a telephone number the Prestige waits this long after
Dialing you stop pressing the buttons before initiating the call. Select how many
Interval seconds you want the Prestige to wait after the last input on the telephone's
keypad before dialing (making) a call.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.

Speed dial Phone book setup

You can configure up to 10 SIP phone number in the Prestige＇s phone book for speed dialing.

All contents copyright (c) 2005 ZyXEL Communications Corporation.

Prestige 2302 Support Notes
77