ZyXEL Communications P-2302HWDL-P1 Support Notes page 53

three internal routes to route packets among the three networks correctly. When you enable DHCP server on the
Prestige, you can configure the client address pool for any of the networks.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ip ro st
Dest FF Len Interface Gateway
192.168.3.0 00 24 enif0:1
192.168.2.0 00 24 enif0:0
192.168.1.0 00 24 enif0
ras>
To allow or block LAN packets to/from IP alias 1 or 2, apply protocol filters in menu 3.2.1. The filter set(s)
applied in SMT menu 3.1 is for the main logical network (configured in menu 3.2).
•
IP Alias Setup
1. Configure the first logical network in menu 3.2 by setting the Prestige's LAN IP address.
DHCP= Server
Client IP Pool:
Starting Address=
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
192.168.3.1
192.168.2.1
192.168.1.1
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
192.168.1.33
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
Metric stat Timer Use
1 041b 0
1 041b 0
1 041b 0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= Yes
0
0
0
53