ZyXEL Communications P-2302HWDL-P1 Support Notes page 20

Generic and TCP/IP (and IPX)
rules on the Prestige. The SMT automatically detects and prevents you from activating two filter types at the
same time. If you configure a Generic and a TCP/IP filter rule (as shown in the following figures) and try to
activate them at the same time, the
displays.
Menu 21.1.1:
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= Yes
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Menu 21.1.2:
filter rules are in different filter sets. You can only activate one type of filter
'Protocol and device filter rules cannot be active together'
Menu 21.1.1 - Generic Filter Rule
Log= None
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
error message
20