ZyXEL Communications P-2302HWDL-P1 Support Notes page 22

Menu 11.1:
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN
Active= Yes
Encapsulation= PPP
Incoming:
Rem Login= test
Rem Password= ********
Outgoing:
My Login= testt
My Password= *****
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5:
Input Filter Sets:
Output Filter Sets:
The SMT does not allow you to apply a protocol filter set (configured in menu 21) to the device filters field in
menu 3.1 or 11.5. Likewise, you cannot apply a device filter in the protocols filters field. However, the SMT
cannot detect whether you have configured device and protocol filter rules in the same filter set. This was
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= ?
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= Yes
Menu 11.5 - Remote Node Filter
protocol filters=
device filters=
protocol filters=
device filters=
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
22