About Filters & Filter Examples; All Contents Copyright (C) 2005 Zyxel Communications Corporation - ZyXEL Communications P-2302HWDL-P1 Support Notes

Once the connection is up, you can establish a secure VPN connection from the PPTP client to the ISP.
The default gateway is then used to route the traffic between the PPTP client and the server.
However, before you can establish a secure VPN connection from the PPTP client to the PPTP server,
you need to know the WAN IP address of the Prestige with the SUA feature enabled. Depending on
your Internet account type and ISP, the Prestige WAN IP address is either fixed(static) or dynamic
(different each time). You need to enter the WAN IP address of the Prestige in the VPN dial-up
connection screen. You can check the WAN IP address of the Prestige in SMT menu 24.1 or using PNC
Monitor. If the Prestige is using a fixed (static) IP address, you can always use this fixed IP address to
connect to the PPTP server.
The following figure shows an example VPN dial-up screen. The VPN Server field is 140.113.1.225
which is a dynamic IP address assigned to the Prestige by the ISP. Make sure you enter the WAN IP
address of the Prestige correctly; otherwise, the VPN connection will fail. After the VPN connection is
established, you can start using Internet applications (such as on-line games).
About Filters & Filter Examples
How does the ZyXEL filter feature work?

All contents copyright (c) 2005 ZyXEL Communications Corporation.

Prestige 2302 Support Notes
17