ZyXEL Communications P-2302HWDL-P1 Support Notes page 16

In Dial-up Networking, create a secure VPN connection through the Prestige (using
the WAN IP address) and enter the correct user name and password to log into the
Windows NT RAS server.
Set the Prestige that connects to the ISP as the Internet gateway.
Prestige Setup
o
•
Before establishing a VPN connection from the PPTP client (Windows 9x) to the PPTP server
(Windows NT server), you must first connect the Prestige to the ISP for Internet access.
•
Enter the IP address and the port number(s) of the PPTP server to allow public access to the server
behind the Prestige. The following shows a configuration example.
After you have set the settings to allow public access to the PPTP server, test the connection from the
PPTP client to the PPTP server. You can use Ping to check that the PPTP client can reach the PPTP
server over the Internet connection. For example, enter "ping 203.66.113.2＂ if the WAN IP address
of the Prestige is 203.66.113.2.
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
16