ZyXEL Communications P-2302HWDL-P1 Support Notes page 54

Field Settings:
If the Prestige's DHCP server is enabled, configure the client address pool for any of the
DHCP Setup
three logical networks.
Enter the first LAN IP address for the Prestige. This will create the first route entry on
TCP/IP Setup
the enif0 interface.
Press [SPACE] to select Yes and press enter to display SMT Menu 3.2.1 – IP Alias Setup
Edit IP Alias
to configure the second and third logical networks on the Prestige.
2. In menu 3.2.1, set the LAN IP address for the second and third logical networks on the Prestige.
IP Alias 1=
IP Alias 2=
Field Settings:
Select Yes and enter the LAN IP address for the second logical network on the Prestige.
IP Alias 1
This will create the second route entry on the enif0:0 interface.
Select Yes and enter the LAN IP address for the third logical network on the Prestige.
IP Alias 2
This will create the second route entry on the enif0:1 interface.
Menu 3.2.1 - IP Alias Setup
Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Yes
IP Address= 192.168.3.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
54