ZyXEL Communications P-2302HWDL-P1 Support Notes page 38

•
After you have configured the rules for the first filter set, view the filter rule summary in SMT
menu 21.2.
Menu 21.2 - Filter Rules Summary
# A Type
- - ---- --------------------------------------------- - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137
2 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138
5 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139
•
Apply the first filter set 'NetBIOS_WAN' in the
node setup.
Configure the second filter set 'NetBIOS_LAN' by entering 2 in the Filter Set field.
•
Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)
Filter #: 2,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6
Destination: IP Addr= 0.0.0.0
Filter Rules
Menu 21.2.1 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 53
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
M m n
N D N
N D N
N D N
N D N
N D N
N D F
'Output Protocol Filter' field for the remote
38