ZyXEL Communications P-2302HWDL-P1 Support Notes page 76

To configure advanced phone port setting, follow the steps below.
Step 1. Access the web configurator on the Prestige. In a web browser, enter the management IP address (the
default is 192.168.1.1) of the Prestige in the address bar.
Step 2. A login screen displays, enter the administrative login password (the default is 1234).
Step 3. In the navigation panel, click VoIP > Phone > Analog Phone.
Step 4. In the Phone Port Settings field, select which phone port you want to configure and click Advanced
Setup.
Step 5. Set the phone port parameters and click Apply to save the settings and make the changes take effect. If
you want to configure the second phone port, select SIP2 in the SIP Account field and follow steps 1 – 5.
The table below describes the related fields.
Label Description
Use this field to select the phone port that you want to configure.
Phone Port
Settings
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
76