ZyXEL Communications P-2302HWDL-P1 Support Notes page 21

Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
TCP Estab= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Saving to ROM. Please wait...
Protocol and device rule cannot be active together
You have to apply the protocol and device filters separately (in SMT menu 3.1 and 11.5). This prevents you
from mistakenly applying the wrong filters. The menus are modified to include new fields as shown below.
Menu 3.1:
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
Output Filter Sets:
Menu 21.1.2 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Log= None
protocol filters=
device filters=
protocol filters=
device filters=
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2302 Support Notes
21