Table of Contents
Advertisement
Maintain the permissible ambient temperature
The ambient temperature should be in a range of +5 °C to +40 °C. If the ambient tempera-
ture exceeds this range it could result in overtemperature in the monitor. In this case the Op-
eration LED initially flashes orange. If the temperature continues to rise the LED will flash
red and brightness will be reduced to prevent overheating.
Avoid reflections on the screen
The monitor has an anti-glare surface that is only effective if the screen is clean and grease-
free.
•
Comply with the specifications for Cleaning.
•
Position the monitor to avoid reflections on the display area.
Reflections can be caused by lights, windows, furniture with shiny surfaces, or light-col-
ored walls.
•
In order to reduce reflections on the monitor, only use non-dazzling reflector bulbs for the
ceiling lighting.
Avoid shocks and impacts
The monitor is sensitive to shock. Shocks and impacts on the panel surface can lead to total
failure.
•
Ensure that such mechanical influences are avoided.
Movable installation
If the monitor is installed such that it can move, make sure that persons or objects in the fa-
cility are not endangered by the monitor's range of movement.
4.2 Installing the monitor
Mounting on a pole or a monitor stand
Multiple monitors can be installed flush horizontally and vertically to one another. The moni-
tor has a VESA 100 x 100 adapter.
Note the following during installation:
•
The maximum torque for attaching to the holder is 1.2 ± 0.2 Nm.
•
The screws used for attaching to the holder must meet the following requirements:
Number
Thread
Solidity class
Insertion depth
•
Mounts must be tested and approved by the manufacturer for the weight to be sup-
ported.
•
An installed stand must be sufficiently stable to withstand tilting of up to 10° without top-
pling the monitor.
CuratOR LX1910
Instructions for Use, 08/2022
4.2 Installing the monitor
4
M4
8.8
max. 10 mm
Setup and installation
15
Advertisement
Table of Contents
