Table of Contents
Advertisement
8
Inspection and maintenance
8.1
Initial inspection
After 200 km or 4 weeks after purchase
Vibrations produced while riding can cause
screws and springs that were tightened during
pedelec manufacture to settle or come loose.
Arrange an appointment for the initial
inspection directly when purchasing the
pedelec.
Have the initial inspection entered and
stamped in the maintenance book.
Carrying out the initial inspection, see Section
8.4.
8.2
Major inspection
every six months
You must have your specialist dealer perform a
major inspection every six months as a minimum.
This is the only way to ensure that the pedelec
remains safe and fully functional.
Tasks require technical expertise, special tools
and special lubricants. The pedelec may become
damaged if the stipulated major inspection and
procedures are not carried out. This is why only
specialist dealers may carry out the major
inspection.
Contact your specialist dealer and arrange an
appointment.
Enter and stamp major inspection tasks in the
maintenance book.
Perform major inspection.
MY23I0a - 42_1.0_22.01.2024
Inspection and maintenance
8.3
Component-specific
maintenance
High-quality components require extra
maintenance. Tasks require technical expertise,
special tools and special lubricants. The pedelec
may become damaged if the stipulated
maintenance intervals and procedures are not
carried out. This is why only specialist dealers
may carry out maintenance.
Correct maintenance on the fork not only
guarantees a long service life, but also ensures
optimal performance.
Each maintenance interval shows the maximum
cycling hours for the required type of maintenance
that the component manufacturer recommends.
Optimise performance with shorter
maintenance intervals, depending on use,
terrain and environmental conditions.
Enter any components with extra
maintenance requirements with their
corresponding maintenance intervals into the
maintenance book when the pedelec is
purchased.
Inform the buyer of the additional
maintenance schedule.
Enter and stamp maintenance tasks in the
maintenance book.
213
Advertisement
Table of Contents
