Table of Contents
Advertisement
6.23.1 Activating the lock function
Only applies to pedelecs with this equipment
Remove the on-board computer used during
set-up.
The lock function is activated. The drive
system now provides no assistance However,
the rider can continue to use the pedelec
without assistance.
The drive unit will emit a lock sound (an audible
signal) as long as the drive system is switched
on.
The lock function status is displayed with a lock
icon on the on-board computer for around
3 seconds.
MY23I0a - 42_1.0_22.01.2024
Operation
178
Advertisement
Table of Contents
