Table of Contents
Advertisement
7.3.19 Cleaning the chain
Notice
Never use aggressive (acid-based) cleaners,
rust removers or degreasers when cleaning
the chain.
Never use gun oil or rust remover spray.
Never use chain cleaning devices or chain
cleaning baths.
Have chain with all-round guard cleaned and
cared for during major inspection.
Place newspaper or paper towels underneath to
collect dirt.
1 Slightly dampen a brush with dish-washing
liquid. Brush both sides of the chain.
2 Dampen a cloth with soapy water. Place the
cloth on the chain.
3 Hold and apply slight pressure while slowly
turning the rear wheel, so the chain passes
through the cloth.
4 Wipe off oily, dirty chains thoroughly with a
cloth and degreaser.
5 Care for the chain after cleaning (see
Section 7.4.16).
7.3.19.1 Cleaning the chain, including all-round
chain guard
Notice
The chain guard must be removed before
cleaning. Contact specialist dealer.
Clean water hole on the chain guard lower
surface.
Care for the chain after cleaning (see
Section 7.4.16.1).
MY23I0a - 42_1.0_22.01.2024
Cleaning, maintenance and inspection
190
Advertisement
Table of Contents
