Using The Battery; Inserting The Battery; Removing The Battery - Bosch i:SY E5 ZR F CX Translation Of Original Operating Instructions

6.8

Using the battery

Switch off the battery and the drive system before

removing or inserting the battery.
6.8.1

Inserting the battery

The key is inserted in the lock.

The lock is unlocked.

1 Place the battery into the lower mount with the
contacts facing the front (1).
Figure 154: Inserting the PowerPack battery
2 Flip the battery upwards so that the battery is
held by the retainer guard (2).
.
4)
5)
6)
Figure 155: Closing the PowerPack battery upwards
MY23I0a - 42_1.0_22.01.2024
5 4
3
2
1
3 Keep the lock open with the key.
4 Push the battery upwards (3).
 The battery can be heard locking into place.
5 Check battery to ensure it is firmly in place on
all sides.
6 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the see (4).
7 Remove the battery key from the battery lock.
8 Check the battery to ensure it is firmly in place
before each ride.
6.8.2

Removing the battery

1 Open battery lock with battery key (1).
 The battery is released and falls into the
retainer guard (2).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (3).
 The battery is released and falls into the
hand (4).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
Operation
159