Table of Contents
Advertisement
FUNCTION DESCRIPTION AND SETTING
Note : Functions are the same when using the remote control and control panel, unless otherwise stated.
POWER ON/OFF
Allows the user to power the unit on or off.
Press the POWER (
Press again to turn off the unit.
TEMPERATURE SETTING
Allows the user to set the temperature in accor-
dance with their needs.
Use the " + " and " – " buttons to increase or de-
crease the set temperature. Each press of either
button increases or decreases the value by 1 °C (or
1 °F) to a maximum of 30 °C (or 86 °F) and to a min-
imum of 16 °C (or 61 °F). Holding either button down
for more than 2 seconds will cause the degrees to
scroll up or down more quickly. Once the tempera-
ture setting is complete, the temperature indicator
on the unit will adjust to reflect the change.
OPERATION MODE SETTING
Allows the user to select an operation mode in ac-
cordance with their needs.
Press the MODE (
operation mode. With each press of the button, the
setting options cycle through in the following order :
Auto
Cooling
Auto Mode : In this operation mode, the unit will au-
tomatically use the best presets based on the am-
bient room temperature. Set temperature cannot be
adjusted.
Cooling Mode : In this operation mode, the unit will
cool the room to the desired temperature as well
as remove moisture from the air.
Drying Mode : In this operation mode, the unit will
reduce the humidity in the air to make the room
more comfortable. Fan speed is automatically set
to Low speed and cannot be adjusted.
OPERATION GUIDE
) button to turn on the unit.
) button to select the desired
Drying
Ventilation
Heating
Ventilation Mode : In this operation mode, the unit
will blow uncooled/unheated air. Set temperature
cannot be adjusted.
Heating Mode : In this operation mode, the unit will
heat the room to the desired temperature.
FAN SPEED SETTING
Allows the user to select a fan speed in accordance
with their needs.
Press the FAN (
) button to select the desired fan
speed. With each press of the button, the setting
options cycle through in the following order :
Low
AUTO
TIMER SETTING
SWITCH-ON TIMER
Allows the user to set a switch-on timer. The unit will
switch on once the start delay has been reached.
While the unit is turned off, press the TIMER (
button. The words "HOUR" and "ON" will begin to
flash on the display screen of the remote control.
Use the " + " and " – " buttons to set the desired time.
Each press of either button increases or decreases
the time by 30 minutes. Holding either button down
for more than 2 seconds will cause the hours to
scroll up or down more quickly. When done, press
the TIMER (
) button to confirm the timer setting.
The words "HOUR" and "ON" will stop blinking on
the display screen of the remote control.
If there is no button press for more than 5 seconds
during time setting, the unit wil cancel out of it.
To cancel a switch-on timer that has been set, press
the TIMER (
) button once
Note : Time setting range is 0.5 to 24 hours.
Medium
High
)
17
Advertisement
Table of Contents
