Gree GPH10ARC-A6NNA1A Owner's Manual page 18

SWITCH-OFF TIMER
Allows the user to set a switch-off timer. The unit
will stop running when the set operating time has
elapsed.
While the unit is turned on, press the TIMER (
button. The words "HOUR" and "OFF" will begin to
flash on the display screen of the remote control.
Use the " + " and " – " buttons to set the desired time.
Each press of either button increases or decreases
the time by 30 minutes. Holding either button down
for more than 2 seconds will cause the hours to
scroll up or down more quickly. When done, press
the TIMER (
) button to confirm the timer setting.
The words "HOUR" and "OFF" will stop blinking on
the display screen of the remote control.
If there is no button pressed for more than 5 seconds
during time setting, time setting will be cancelled.
To cancel a switch-off timer that has been set, press
the TIMER (
) button once
Note : Time setting range is 0.5 to 24 hours.
AUTOMATIC SWING FUNCTION
Allows the user to activate or deactivate the au-
tomatic swinging of the unit's horizontal airflow
deflectors.
Press the SWING ( ) button to turn on the Swing
function. Press again to turn it off.
Note : This function is only available for some
models.
SLEEP FUNCTION
Allows the unit to use a preset sleep curve to main-
tain the most comfortable temperature for you
during the night.
Press the SLEEP (
function. Press again to turn it off.
Note : This function is only available in Cooling or
Heating mode.
HEALTH FUNCTION
Not available for this model.
18
OPERATION GUIDE
) button to turn on the Sleep
WIFI CONTROL
Allows the user to control the unit remotely from
their smartphone or tablet.
Press the WIFI button on the remote control to ac-
)
tivate the function. The word " WiFi " will appear on
the display screen of the remote control. Holding
down the WIFI button for at least 5 seconds will de-
activate the WiFi function.
Holding down the MODE (
simultaneously for 1 second will restore the WiFi
module to factory settings.
LIGHTS ON/OFF
Allows the user to turn on and off the lights of the air
conditioner.
Press the FAN (
ously for 3 seconds on the remote control o turn the
lights on or off.
The default setting after being powered on is for the
lights to be on.
TEMPERATURE UNIT CHANGEOVER
Allows the user to select between Celsius or Fahr-
enheit as the temperature unit for the display.
While the unit is turned off, press the MODE (
and " – " buttons simultaneously to select Celsius as
the desired temperature measuring unit for the dis-
play. Press the same buttons simultaneously again
to select Fahrenheit.
) and WIFI buttons
) and " + " buttons simultane-
)