Setting Up Your Mu100; What You'll Need; Making The Connections - Yamaha MU100 Owner's Manual

Setting Up Your MU100

Setting Up Your MU100
In this section, you'll learn how to:
Connect the MU100 in the most basic setup — with a MIDI keyboard and
an external amplifier/speaker system.
Other setup examples are covered in later sections; for example, setting up
for use with a computer is on page 35. Once you've set up the MU100, we
urge you to play the Demo song (page 31) and hear what the instrument is
capable of.

What You'll Need

The MU100 and the included PA-5B power adaptor.
A MIDI keyboard, electronic piano, or any instrument that can output
MIDI data.
An amplifier/speaker system, preferably stereo. Alternately, you can use
a set of stereo headphones.
Audio connecting cables.
A MIDI cable.

Making the Connections

CAUTION!
Before making any connections, turn all related equipment off, and make sure the
MU100 power adaptor is not connected to an electrical outlet.
Operation
1 Connect the MIDI cable.
Connect the MIDI OUT terminal of the MIDI keyboard to the
MIDI IN-A of the MU100 (as shown in the illustration).
2 Connect the audio cables.
Connect the L and R OUTPUT jacks of the MU100 to the ap-
propriate inputs on the amplifier speaker system (as shown in
the illustration).
•If you are using stereo headphones, connect them to the front
panel PHONES jack.
28
Guided Tour