Pitch Parameters; Pitch Coarse; Pitch Fine; Velocity Pitch Sensitivity (Velpchsens) - Yamaha MU100 Owner's Manual

Yamaha mu100 synthesizer: owners manual
Hide thumbs Also See for MU100:
Table of Contents

Advertisement

The Drum Setup parameters are only available when the Part Mode has
been set to drumS1 — S4. (See page 108.)

Pitch Parameters

Pitch Coarse

Range:
–64 — +63 (XG mode), 000 —
127(TG300B or C/M mode)
This determines the coarse pitch setting
of the selected drum sound.

Pitch Fine

Range:
–64 — +63
This determines the fine pitch setting of
the selected drum sound.

Velocity Pitch Sensitivity (VelPchSens)

Range:
–16 — +16
This determines the degree to which pitch
changes of the selected drum sound respond
to velocity. In other words, you can control
how much the pitch of the sound changes
by how hard or soft you play the keys of a
connected keyboard. Positive values raise
the pitch and negative values lower the
pitch. A value of 00 results in no pitch
change, whatever velocity is received.

Level

Level
Range:
000 — 127
This determines the volume of the se-
lected drum sound.
Assignment ......................................................... 117
Alternate Group
Note On/Off ........................................................ 118
Receive Note On (RcvNoteOn)
Receive Note Off

Pan

Pan
Settings:
This determines the stereo position of the
selected drum sound. A setting of "Rnd"
(Random) randomly assigns the drum to a
pan position. This is useful when you want
to have different drums sound from differ-
ent random parts of the stereo image.

Effect Send Parameters

Reverb Send (Rev Send)

Range:
This determines the level of the selected
drum sound that is sent to the Reverb ef-
fect. A value of 000 results in a completely
"dry" drum sound, no matter how much
Reverb is applied to the Drum Part.
NOTE
Keep in mind that the Reverb effect must be
properly enabled and set for this parameter to
work as intended. (See page 134.) Also, the pa-
rameters Reverb Send in Single Part control
(page 97) and Reverb Return in All Part control
(page 98) must be set to appropriate values.
Multi Mode
Multi Edit Mode
Rnd (Random), L63 — C —
R63
000 — 127
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents