Adjusting The Overall Tone - Multi Eq - Yamaha MU100 Owner's Manual

Equalizer (EQ)
Adjusting the Overall Tone — Multi EQ
The multi EQ section gives you five-band control (at specific frequencies)
over the entire sound of the MU100. Special presets are also available for
instantly changing the tone to suit different types of music.
Operation
1 Call up the "EQ TYPE" parameter and select the desired EQ pre-
set.
First press the [EQ] button, then use the [SELECT </>] buttons
to select the parameter. Then use the [VALUE -/+] buttons or
data dial to select the desired preset.
2 If desired, change the values of the five different bands.
Use the [SELECT </>] buttons to select the parameter, then
change the value with the [VALUE -/+] buttons or data dial.
The changes you make to a selected EQ preset are maintained even
when the power is turned off. However, selecting another preset au-
tomatically cancels your original settings.
For more information on the Equalizer effects, see page 142. Also,
refer to the Multi Mode Equalizer Lock parameter (page 144).
84
1) The graphic EQ display shows the EQ curve.
2) The EQ icon's sliders indicate current settings and move
as the value is adjusted.
Guided Tour