Effect Edit Mode; Reverb (Rev) - Yamaha MU100 Owner's Manual

Reverb (REV)

Reverb (REV)

Reverb recreates the sounds of various performance environments by add-
ing an ambient wash of delays or reflections. Several different types of Re-
verb effects are available to simulate the ambience of different sized rooms.
Explanations of the Reverb Type and Reverb Pan parameters are given
below. For descriptions and explanations for all other Reverb parameters,
refer to the separate SOUND LIST & MIDI DATA booklet.
Type
Settings: NO EFFECT, HALL 1 — 2,
ROOM 1 — 3, STAGE 1 —
2, PLATE, WHITE ROOM,
TUNNEL, CANYON, BASE-
MENT
This determines the Reverb Type. Each
Reverb Type has different values for the
rest of the Reverb parameters; for ex-
ample, Basement has a Reverb Time of
0.6 seconds, while Canyon has a Reverb
Time of 12.0 seconds.
NOTE
When "NO EFFECT" is selected, Reverb is
off and none of the other Reverb parameters
are available (with the exception of the Re-
verb Pan parameter).
HINT
Generally when using Reverb, you can sim-
ply select the particular Type needed, and use
it without bothering to adjust the other pa-
rameters. If fine tuning of the Reverb sound
is necessary, delve into the other parameters
as needed.
134
Reverb Pan (RevPan)
Range:
This determines the Pan position of the
Reverb sound, or where it appears in the
stereo image.
For details on the parameters for each
Reverb Type, refer to the separa te
SOUND LIST & MIDI DATA booklet.

Effect Edit Mode

L63 — C — R63